Technical Info

  SUMMARY This work describes the possibility of curling the funds in a non-circular way simultaneously with...

  SUMMARY The premature fall of the shell - or sketch of an easy opening ends - from the punch assembly, in a...

  DESCRIPTION The function of a die of lids is to die and form them from the metal strips that are fed to the...

  SUMMARY: In order to achieve savings in tooling for primary scroll cutting of coils, it is possible to obtain a...

  Considering this as of interest, the way to calculate the geometry of the zigzag cutting profile of sheets and...

   SUMMARY Description of several industrial procedures for the recovery of tin contained in tinplate scraps...

  SUMMARY Information for the construction of chimney caps in metal installations. UTILIZATION The cap is a piece...

INTRODUCTION The technique of using a type of inks that dry by the action of ultraviolet radiation is relatively...

INTRODUCTION   The containers are decorated by means of their lithography. The lithography of a container is...

COMMENTS ON MAINTENANCE IN A PACKAGING FACTORY   REFLECTIONS First of all, we should try to define and define the...

  INTRODUCTION The automatic presses used in the manufacture of caps or standard funds for metal containers...

  By Juan Manuel Sancho Moronta The author develops his experience in the implementation of a program of...

  The author tells about his experience in implementing a Preventive Maintenance and Repair Program - (Preventive...

  It is common in the metal industry that the case of having to move a facility already underway to another...

  The internal corrosion in tin can during storage, has its origin in the interaction between the can and the...

  A. CORROSION DUE TO ACID PRODUCTS (pH 3.0 to 5.0) The main manifestation of this type of corrosion is the...

  The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate...

  Importance of the bead in a metal cans, different types, their design and uses, as well as the technique to...

SUMMARY Functions of the container body flange. Its dimensioning and the way it is carried out. INTRODUCTION The...

One of the last improvements made to canning containers has been the reduction of the diameter of the bottom. This...

  Practical procedure for preparing a technical sheet defining the right metal for a container body type "3 pieces"  ...

  Advantages that its use represents. Design and way to make them.   INTRODUCTION Until now, in deep-drawn containers,...

  The way to prepare a "product file" is developed, which allows to have at the foot of the line, the appropriate...

  Developed in the last third of the 20th century, two-piece containers of this type are undoubtedly the greatest...

  In the last decades of the last century, a new technique for the manufacture of sausage packaging was developed,...

On different occasions we have been asked the question: What are the advantages or disadvantages of using sausage...

  Description, function, types and measurements of the curls - or edges - of the wings of bottoms and covers....

  Some indications for the realization of the holes for lodging plastic necks in metal containers.   PREAMBLE The use...

SUMMARY   Dimensioning, tooling for its execution, and quality control for the necessary drilling to be made for the...

  Use, types and design of these accessories for metal containers. USE It is common that for certain uses, metal...

SUMMARY It defines the function of the bottom flange in the closure operation of a container, the different shapes of...

SUMMARY In a simple way it develops in the form of a table, the calculation of the variable cost of a lid, starting...

SUMMARY The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate...

SUMMARY Some ideas on how to precisely determine the cut of flat metal for the configuration of a background. This...

SUMMARY Essential measures to take into account in an aerosol cone, for its assembly in the package. INTRODUCTION To...

SUMMARY Study of the characteristics, dimensions and equipment necessary for the manufacture of domes of aerosol...

SUMMARY The paint and varnish industry consumes large quantities of metal containers. These containers have the...

SUMMARY In the traditional container of one kilogram in diameter 99, the pressure to reduce its cost has led over...

In order to achieve the vacuum by mechanical process in a packaging, the lids must be properly prepared. The use of...

Attending several requests, we start with this article a series of works on the easy-opening covers, of the total...

The metal industry uses covers or funds with different types of profiles. In this article an explanation of the use of...

SUMMARY It is important to have a good document on the basic matter in the metal sector, tinplate, TFS, aluminum ......

INTRODUCTION Metal containers in general are often lithographed on the outside and varnished inside. The lithography...

INTRODUCTION. ELECTROSTATIC POWDER. With the appearance of electric welding as a new technology to weld the lateral...

BACKGROUND Before appearing on the market the electrically welded seam in the bodies of the containers, the normal...

The copper used in the welding of containers must have special characteristics, both dimensional and physical and...

Those products that are designated under the generic term "compounds" indicate that the substances that form part of...

We focus on this work in some of the aspects that imply the use of varnishes as interior protection of metal...

If you want to read "BARNICES .- Part 1" click here PART 2: CHARACTERISTICS OF VARNISHES The data shown in this table...

  INTRODUCTION A very high proportion of the metallic packaging consumed today, whatever its use - food,...

Thousands of kilograms of 3104 or 5182 aluminum material are manufactured daily around the world for the manufacture...

The processing of tuna in frozen precooked loins, preserves, pouches, smoked or other presentations for direct human...

For the use of easy-to-open ends it is necessary to take a number of precautions, which are usually not necessary for...

For the printing of 2-piece cans, today we have dec- orators full of accessories and enough technology to produce over...

One of the problems that most concern the canning industry is external corrosion of the containers, since it affects...

Every year nearly a half trillion units of beverage can are manufactured— that’s about 15,000 per second — so many...

Comparative table of the mechanical properties of tinplate and its main uses

INTRODUCTION CONTAINERS WITH LITHOGRAPHED BODY Alternatives and evolution of the lithographic reserves in the bodies...

BACKGROUND Nicolás Appert, in Paris and at the end of the 18th century, discovered how to preserve food. In 1795 he...

All the known systems for the determination of the hermeticity in metal containers destined to the canning factories,...

     

[et_pb_section][et_pb_row][et_pb_text]

  INTERNATIONAL EQUIVALENCES OF MOST COMMON PACKAGING AMERICA AND ASIA EUROPE AND AFRICA NOMINAL MEASURES...

The calculation of the variable cost of a "three pieces" container - body, lid and bottom - is developed in the form...

Analysis of the evolution of the height of the body of an aerosol container during the different stages of its...

The purpose of this paper is to describe in a simple way the way of working of a die to shape funds of canning...

  PASSIVATION In the tinplate manufacturing process, after tinning, it is subjected to a passivation treatment by...

The types of closures that can be applied at the junction of the body of a container with its lid or bottom depend on...

  In the following chart we summarize the most common types of varnishes used based on: -          To which...

  It is common to provide certain containers, intended to contain non-consumable products at one time, an overcap...

When printing and internal and external lacquering of three-piece container bodies is to be carried out, the...