The toggle lever is used on a bodymaker machine to change the machine stroke on a double stroke machine. To change the stroke of the machine, it is necessary to make changes to the swing lever configuration. The primary connecting rod sleeve is centered on the pivot...
To reduce can top wall variations, it is essential to optimize the drawing and pressing process. The knowledge base provides some insights into this process: Adjust the reduction percentages: For taller cans, the wall thickens toward the top. You can reduce this wall...
The principle of operation of a Bodymaker involves several steps to transform a cup into a can body. Here is a brief summary of the process: Material and lubrication: The process begins with a cup made of high quality material and proper lubrication. The quality of...
The separator ring and pilot ring are essential components of the body forming machine, which is used to manufacture aluminum beverage cans. These rings play a crucial role in the ironing process, ensuring that the cans are formed accurately and uniformly. Separator...
Cooling systems play a crucial role in the operation of a bodybuilder. Here are some key points related to Bodymaker cooling systems: Coolant: The body builder needs a constant flow of coolant at a rate of 80-120 liters/min at 40°C (21-32 gallons/min at 104°F). No...
Introduction In the manufacturing process of aluminum beverage cans, defects such as the “short can” can arise at various stages, impacting production efficiency and leading to wasted products. To optimize the production process and minimize defects, it is...
Introduction In the can manufacturing process, maintaining consistent can height is crucial for ensuring the quality and performance of the final product. Uneven can height can lead to various issues, such as sealing problems and compromised structural integrity. This...
Introduction In the aluminum can production process, bodymaker machines play a crucial role in shaping and forming the cans. However, defects may occur during the production process, causing issues in the final product. One such defect is known as...
Introduction The bodymaker is a crucial machine in the can manufacturing process, responsible for reducing the diameter and sidewall thickness of the cup while extending its height. A common defect that can occur during this process is the “short trim”...
Introduction Tear-offs are one of the most common defects encountered in can-making machinery, specifically in bodymakers. This technical article aims to provide a comprehensive understanding of tear-offs, their causes, and effective troubleshooting methods to...
