Technical Info

Formato Diametro(1) interior aprox. Capacidad (2) real aprox. Caracteristicas Designación Utilización 52x47 52,3 83 3...

En el mercado español, es muy frecuente el uso de envases rectangulares para diferentes utilizaciones. En el cuadro...

Volver a Datos Mundo Latas

Volver a Datos Mundo Latas

DATOS IDENTIFICATIVOS DE LA HOJALATA OPERACIÓN IDENTIFICACIÓN Acero base MC =Poca resistencia a la corrosión MR= El...

Las siderurgias pueden entregar diferentes calidades de materiales (hojalata, TSF, LTS, etc...). Los precios de los...

COMPARACIÓN DE MEDIDAS DE VISCOSIDAD EN COPAS ZAHN – 2, FORD – 4 Y DIN – 4   A veces, los distintos fabricantes...

[table id=1 responsive=flip /] Volver a Datos Mundo Latas

Volver a Datos Mundo Latas

El acabado superficial de la hojalata y productos laminados recubiertos, está determinado por el empleo de  los...

  Normally the electrolytic tinplate is lubricated with "dioctyl sebacate" (DOS) or with seed oils applied by...

INTRODUCTION Rulina: It is the part of the seamer that performs the operation of deforming the metal, to configure the...

INTRODUCTION Rulina: It is the part of the seamer that performs the operation of deforming the metal, to configure the...

Click here to see part 1 Click here to see part 2 Click here to see part 3 4th delivery CLOSING THEORY 13º.- ANALYSIS...

- By clicking here you can access the 1st part of this work. - By clicking here you can access the 2nd part of this...

Back to - By clicking here you can access the 1st part of this work.     5º.- EVALUATION OF THE CLOSING...

This is the beginning of a work on the THEORY OF CLOSURE which is published in four parts or chapters.   PART 1:...

lRESUMEN The closing operation in a rectangular container has some characteristics that make it different from a round...

  In a concise wording, the guidelines to follow to correctly use the compression plate of a seamer are...

It describes what the titanium nitride treatment consists of in the seaming machine tools and the advantages it...

SUMMARY The closing operation is key to the metalworking and packaging industry. Here we develop the necessary...

Although there are already extensive works on this website dedicated to the important subject of the closure of metal...

Downloadable locking control courtesy of Pulidos Loliser S.L., Loliser has the support of great professionals in the...

The closure specifications for two-piece 52 (202) diameter containers used in the packaging of beer and carbonated...

IIntroduction to the excellent work “INSTRUCTIONS FOR THE CORRECT USE OF THE TWIST, PT, PT PLUS VACUUM COVERS” which,...

It is very important, for the good presentation of a preserves packed in glass jars, closed with "twist-off" type caps...

[et_pb_section][et_pb_row][et_pb_text] SUMMARY In this work, the characteristics of the metal caps used in wide-mouth...

This article illustrates the quality that should be met by a cap intended for aerosol containers and how to define and...

A canner - canner, filler, etc. - You must define your policy in relation to the quality of your raw materials, among...

Quality is everyone's job, including the production team. It is necessary to involve each of the operators of a line...

The procedure and means necessary to assemble a simple quality control system centered on three-piece cans is...

  The cans intended to contain food must have the strength and robustness to allow handling, filling and...

  INTRODUCTION La soldadura eléctrica, de la costura lateral The electrical welding, of the lateral seam of the...

  In the "70s" of the last century, when the new welding technique of the lateral seam of the "three pieces"...

  SUMMARY Determination, in a simple way, of the applied load of powder varnish on the inside face of the side...

  SUMMARY Mode and means to control the quality of the curl of the domes for aerosol containers on which the...

  SUMMARY In this article, we will try to describe an inexpensive way to verify the internal pressure, which...

  The means and the way to perform a dimensional control of ends, applying simple and reliable procedures, are...

SUMMARY Description and location of quality control points on a coil cutting line   INTRODUCTION The lines of cut...

  SUMMARY Determination and evaluation of the porosity of the interior varnish of a can by means of a high...

  The protection both external and internal of a metal container by means of varnishes is a very normal technique...

  We will study in this work the defects that can be presented more frequently in the realization of a...

   One of the most used typical tests in the metagraphic sector, which may also have application in the packaging...

  The defects produced in the tinplate varnishing (faults, "eyes", lack of adhesion ...), may be due to, among...

  INTRODUCTION The reduced double tinplate has a high rigidity, characterized by a hardness measured on the...

  SUMMARY It describes tests carried out in the laboratory, with canned different vegetable preserves, carried...

Filiform corrosion is a form of attack in which the corrosion process manifests itself in filaments and represents a...

  It is mainly interesting to examine the behavior of tinplate as a raw material for the manufacture of...

It is increasingly common for the container manufacturer to buy the metal to be used (tinplate, TFS or aluminum) in...

  LIST OF ASPECTS AND SUPERFICIAL DEFECTS Summary   MINOR DEFECTS: # Lines of Lüders # Brands of cold...

STUDY OF THE LANGELIER INDEX: INFLUENCE OF DIFFERENT PARAMETERS ON WATER AGGRESSIVENESS As we already know, the...

Pin Oven (Pin Oven) Designed specifically for the curing of exterior varnish on cans, a curing process that takes...

1. INTRODUCTION Sulfurations are chemical reactions that occur on the surface of some metallic containers with certain...

For several years now, with 489 million hectoliters, China has established itself as the world's largest beer...

As we mentioned in the previous publication, the thermal validation studies carried out in canning plants are...

It is important to reproduce the customer's requirements as accurately as possible, both in terms of color and the...

There is no doubt that the soda cans are a true feat of engineering and represent a true story of achievement....

Varnishes are products applied on tinplate to improve the chemical and physical resistance of the container bodies and...

The tooling package used for body forming in a Bodymaker can have several types of configurations. The most common...

Each decorator is equipped with 6 and up to 8 inkers, all of which are driven from the ring gear to ensure perfect...

After the sad case of botulism that occurred in the city of Andresito in Argentina, with some fatalities to regret,...

The crown cap is an everyday item to which we owe a great deal. In Spain and South America it is popularly known as...

This process of reforming the dome on the inside is typically done after the flange is formed on the can. The Dome...

One of the problems that usually appears in the manufacture of closures is the change of some of the elements that...

It is known that there is a generational change in people and techniques, and it continues to change. Why will this...

Foods preserved in hermetically sealed metal containers, which are thermally processed and presented as durable food...

Every day of hard work, we face different opportunities and challenging scenarios. In the pursuit of operational...

Nowadays it is very important to have a good operational decorator and all can makers are trying to do everything they...

Last month I published an article in networks, about a very particular case, where a good friend asked me about how he...

One of the aspects that must be taken into account when changing any of the specifications of a package and/or its...

1Analysis by region. Market of metal cans for food and beverages.1.1 South AmericaSouth America is expected to...

Water is the most used natural resource in the production of canned food, for washing food, for preparing covering...

As we all know one of the main problems of the packers is the corrosion of the cans. Corrosion of steel is a...

In the last decade, weight reduction of three-piece food cans had not really progressed due to the problem of can...

In our daily work routine we have to deliver our products together meeting all production indicators. Safety is...

The demand for aluminum beverage cans and lids is at its peak lately due to multiple factors, among them the...

4.1 CROWN HOLDINGS, INC. Crown Holdings is a leading manufacturer and marketer of metal packaging technology. It was...

Packaging companies could implement the actions listed below to counteract the effect, sustain themselves through this...

INTRODUCTION Sustainability is a major concern in the food and beverage packaging industry. Although several...

Dangerous goods or IMO are products that pose a risk to health, the environment or property, such as flammable...