No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
DECORATION OF CONTAINERS
INTRODUCTION The containers are decorated by means of their lithography. The lithography of a container is...
COMMENTS ON MAINTENANCE IN A CONTAINER FACTORY
COMMENTS ON MAINTENANCE IN A PACKAGING FACTORY REFLECTIONS First of all, we should try to define and define the...
PREVENTIVE MAINTENANCE OF AUTOMATIC PRESSES
INTRODUCTION The automatic presses used in the manufacture of caps or standard funds for metal containers...
Preventive Maintenance and Repair in a “two-piece” packaging factory (DWI)
By Juan Manuel Sancho Moronta The author develops his experience in the implementation of a program of...
PREVENTIVE MAINTENANCE
The author tells about his experience in implementing a Preventive Maintenance and Repair Program - (Preventive...
TRANSFER OF FACILITIES
It is common in the metal industry that the case of having to move a facility already underway to another...
TIN CAN EXTERNAL CORROSION
The internal corrosion in tin can during storage, has its origin in the interaction between the can and the...
MAIN REACTIONS BETWEEN CAN AND THEIR CONTENTS
A. CORROSION DUE TO ACID PRODUCTS (pH 3.0 to 5.0) The main manifestation of this type of corrosion is the...
PRODUCT TECHNICAL SHEET: CANS “THREE PIECES”
The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate...
CANMAKER BEADERS
Importance of the bead in a metal cans, different types, their design and uses, as well as the technique to...
ENTAILED PACKAGING
One of the last improvements made to canning containers has been the reduction of the diameter of the bottom. This...
SPECIFICATION OF TIN FOR CONTAINER BODIES “3 PIECES “
Practical procedure for preparing a technical sheet defining the right metal for a container body type "3 pieces" ...
CONTAINERS FOR SAUSED PACKAGING
Advantages that its use represents. Design and way to make them. INTRODUCTION Until now, in deep-drawn containers,...
PRODUCT DATASHEET: SAUSED PACKAGING
The way to prepare a "product file" is developed, which allows to have at the foot of the line, the appropriate...
PACKAGING TWO PIECES DWI
Developed in the last third of the 20th century, two-piece containers of this type are undoubtedly the greatest...
PACKAGING TWO PIECES DRD
In the last decades of the last century, a new technique for the manufacture of sausage packaging was developed,...
COMPARISON BETWEEN CONTAINERS 2 AND 3 PIECES
On different occasions we have been asked the question: What are the advantages or disadvantages of using sausage...
THE CURL ON THE TAPAS
Description, function, types and measurements of the curls - or edges - of the wings of bottoms and covers....
ASSEMBLY OF PLASTIC BAGS
Some indications for the realization of the holes for lodging plastic necks in metal containers. PREAMBLE The use...
PERFORATIONS FOR GOLLETES / PLUGS
SUMMARY Dimensioning, tooling for its execution, and quality control for the necessary drilling to be made for the...
OVERHEADS AND PRESSURE PLUGS FOR METAL CONTAINERS
Use, types and design of these accessories for metal containers. USE It is common that for certain uses, metal...
INFLUENCE OF THE BOTTOM FLANGE OR THE LID ON THE DOUBLE SEAL
SUMMARY It defines the function of the bottom flange in the closure operation of a container, the different shapes of...
CALCULATION OF STANDARD COST FROM A COVER
SUMMARY In a simple way it develops in the form of a table, the calculation of the variable cost of a lid, starting...
PRODUCT TECHNICAL DATA SHEET: ENDS
SUMMARY The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate...
DETERMINATION OF THE COURT FROM A ENDS
SUMMARY Some ideas on how to precisely determine the cut of flat metal for the configuration of a background. This...
DIMENSIONS FOR CUPPAGES OF ENERALED AEROSOLS
SUMMARY Essential measures to take into account in an aerosol cone, for its assembly in the package. INTRODUCTION To...
AEROSOL CUPS
SUMMARY Study of the characteristics, dimensions and equipment necessary for the manufacture of domes of aerosol...
PAINT CONTAINER CLOSURES
SUMMARY The paint and varnish industry consumes large quantities of metal containers. These containers have the...
EVOLUTION OF THE FUNDS PROFILE DIAMETER 99
SUMMARY In the traditional container of one kilogram in diameter 99, the pressure to reduce its cost has led over...
