No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
NOTCHES IN LID-BOTTOMS FOR VACUUM SEALING
In order to achieve the vacuum by mechanical process in a packaging, the lids must be properly prepared. The use of...
TAPAS EASY OPENING FOR PRESERVES
Attending several requests, we start with this article a series of works on the easy-opening covers, of the total...
PROFILES OF CAPS / ENDS FOR ROUND CANS
The metal industry uses covers or funds with different types of profiles. In this article an explanation of the use of...
SPECIFICATION OF TIN FOR ENDS
SUMMARY It is important to have a good document on the basic matter in the metal sector, tinplate, TFS, aluminum ......
DESIGN AND DIMENSIONED OF LITHOGRAPHY AND VARNISHES
INTRODUCTION Metal containers in general are often lithographed on the outside and varnished inside. The lithography...
ELECTROSTATIC POWDER
INTRODUCTION. ELECTROSTATIC POWDER. With the appearance of electric welding as a new technology to weld the lateral...
CEMENTS FOR SIDE SEAMS
BACKGROUND Before appearing on the market the electrically welded seam in the bodies of the containers, the normal...
COPPER WIRE
The copper used in the welding of containers must have special characteristics, both dimensional and physical and...
SEALANT COMPOUNDS
Those products that are designated under the generic term "compounds" indicate that the substances that form part of...
SOME CONSIDERATIONS ON VARNISHES
We focus on this work in some of the aspects that imply the use of varnishes as interior protection of metal...
VARNISHES – (2nd part)
If you want to read "BARNICES .- Part 1" click here PART 2: CHARACTERISTICS OF VARNISHES The data shown in this table...
VARNISHES (1st part)
INTRODUCTION A very high proportion of the metallic packaging consumed today, whatever its use - food,...
PRACTICES TO BE USED IN THE USE OF TFS
INTRODUCTION TFS is a material normally used in the manufacture of caps, bottoms and deep-drawn containers. By...
LOW COATED STEELS TIN
[et_pb_row]SUMMARY Description, types, characteristics and qualities of LTS materials INTRODUCTION Tin is the most...
BULK PACKAGING TIN
[et_pb_row] SUMMARY Depending on the type of cut of the sheet and the transport system used, it is required to prepare...
RATE OF MATERIALS LAMINATES
[et_pb_row] SUMMARY The different concepts that appear in a price list of laminated materials supplied by the steel...
DISTINCTIVE ELEMENTS OF THE METALS
[et_pb_row] We refer in this work to the metals that can be used as raw material for the manufacture of packaging:...
PROPERTIES OF BASE STEEL
SUMMARY PROPERTIES OF BASE STEEL Brief review of the characteristics of the base steel of tinplate, its definition,...
TFS chrome plate
The name of TFS comes from the English words "TIN FREE STEEL", which can be translated as "tin-free steel". It is also...
DOUBLE REDUCED TINPLATE
SUMMARY Description of the manufacturing process and characteristics of this type of tinplate. Thin, high strength...
Tinplate: everything you need to know
MANUFACTURE AND CHARACTERISTICS OF TINPLATE This document develops in some detail the different stages in the...
BASIC NOTIONS ABOUT TINPLATE
SUMMARY Brief description of the different stages of tinplate manufacture, its structure and properties. INTRODUCTION...
