The easy open lid comes out open after the autoclaving process, what can it be?

There are several reasons why easy-open lids may come out open after the autoclaving process. Here are some of the possible causes:

1. Excessive pressure during the autoclaving process: If the pressure inside the autoclave is too high, this may cause the lids to open during the sterilization process. It is important to ensure that the pressure inside the autoclave is within the recommended limits for the type of lid being used.
   
2. Problems with the lid seal: If the lid seal is not adequate, this may cause the lid to open during the autoclaving process. It is important to ensure that the lid is properly sealed before placing it in the autoclave.
   
3. Problems with the lid itself: If the lid is not designed to withstand the conditions of the autoclaving process, this may cause it to open during the sterilization process. It is important to ensure that the lid used is suitable for the type of product and sterilization process being used.
   
4. Problems with the autoclaving process: If the autoclaving process is not performed correctly, this can cause the lids to open during the sterilization process. It is important to ensure that the autoclaving process is carried out in accordance with the specifications recommended by the manufacturer of the lid and autoclave equipment.

Tuna canning and sterilization process How is the autoclave adjusted to sterilize the tuna? Aluminum beverage can manufacturing: a high technology process what should the sterilization water for containers be like? What are the risks of double seam with short hooks? Cans collapse in the autoclave: causes and solutions Recommendations to avoid porosity inside a container HOMOLOGATION OF LIDS DUE TO CHANGES IN ANY OF THEIR SPECIFICATIONS Loss of airtightness and deformation of metallic sanitary containers in process MANUFACTURING PROCESS OF AN EASY-OPEN LID