A. CORROSION DUE TO ACID PRODUCTS (pH 3.0 to 5.0) The main manifestation of this type of corrosion is the dissolution, by the action of the contents of the tin, of the tin...
The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate information for the correct manufacture of a container of the...
Importance of the bead in a metal cans, different types, their design and uses, as well as the technique to carry them out with their various models of equipment....
One of the last improvements made to canning containers has been the reduction of the diameter of the bottom. This paper explains the reasons for its origins, the advantages...
Practical procedure for preparing a technical sheet defining the right metal for a container body type "3 pieces" INTRODUCTION We have already discussed this topic in...
Advantages that its use represents. Design and way to make them. INTRODUCTION Until now, in deep-drawn containers, especially low-lying ones, it was normal to present a...
The way to prepare a "product file" is developed, which allows to have at the foot of the line, the appropriate information for the correct manufacture of a package of the...
Developed in the last third of the 20th century, two-piece containers of this type are undoubtedly the greatest advance in the technology of metal packaging, since its...
In the last decades of the last century, a new technique for the manufacture of sausage packaging was developed, which is known as DRD. It was one of the most important...
On different occasions we have been asked the question: What are the advantages or disadvantages of using sausage packaging in relation to the classic "3 pieces"? Or also What...
Description, function, types and measurements of the curls - or edges - of the wings of bottoms and covers. DEFINITION It is designated by curl to the outer rim of a lid or...
Some indications for the realization of the holes for lodging plastic necks in metal containers. PREAMBLE The use of plastic necks, spouts and stoppers is very widespread...
SUMMARY Dimensioning, tooling for its execution, and quality control for the necessary drilling to be made for the assembly of a metal neck. INTRODUCTION In packages...
Use, types and design of these accessories for metal containers. USE It is common that for certain uses, metal containers need an overcap. This happens when the content of...
SUMMARY It defines the function of the bottom flange in the closure operation of a container, the different shapes of the flange used, how to measure it and its appropriate...
SUMMARY In a simple way it develops in the form of a table, the calculation of the variable cost of a lid, starting from the consumptions necessary for its manufacture. ...
SUMMARY The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate information for the correct manufacture of a lid or bottom....
SUMMARY Some ideas on how to precisely determine the cut of flat metal for the configuration of a background. This system serves for any type of background or cover, both...
SUMMARY Essential measures to take into account in an aerosol cone, for its assembly in the package. INTRODUCTION To ensure interchangeability between the different parts,...
SUMMARY Study of the characteristics, dimensions and equipment necessary for the manufacture of domes of aerosol containers. INTRODUCTION The aerosol containers are part of...
SUMMARY The paint and varnish industry consumes large quantities of metal containers. These containers have the particularity of being airtight, but with an easy access to be...
SUMMARY In the traditional container of one kilogram in diameter 99, the pressure to reduce its cost has led over time, to change the profiles of the covers and bottoms,...
In order to achieve the vacuum by mechanical process in a packaging, the lids must be properly prepared. The use of notches on the flange allows sufficient space to create a...
Attending several requests, we start with this article a series of works on the easy-opening covers, of the total opening type, used in preserves in a generalized manner. In...
The metal industry uses covers or funds with different types of profiles. In this article an explanation of the use of the most frequent ones is given as well as the selection...
SUMMARY It is important to have a good document on the basic matter in the metal sector, tinplate, TFS, aluminum ... It is useful for a multitude of tasks. The following...
INTRODUCTION Metal containers in general are often lithographed on the outside and varnished inside. The lithography of the body of the container - and sometimes also the lid...
A. CORROSION DUE TO ACID PRODUCTS (pH 3.0 to 5.0) The main manifestation of this type of corrosion is the dissolution, by the action of the contents of the tin, of the tin...
The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate information for the correct manufacture of a container of the...
Importance of the bead in a metal cans, different types, their design and uses, as well as the technique to carry them out with their various models of equipment....
SUMMARY Functions of the container body flange. Its dimensioning and the way it is carried out. INTRODUCTION The flange is the flange of the container body at each of its...
One of the last improvements made to canning containers has been the reduction of the diameter of the bottom. This paper explains the reasons for its origins, the advantages...
Practical procedure for preparing a technical sheet defining the right metal for a container body type "3 pieces" INTRODUCTION We have already discussed this topic in...
Advantages that its use represents. Design and way to make them. INTRODUCTION Until now, in deep-drawn containers, especially low-lying ones, it was normal to present a...
The way to prepare a "product file" is developed, which allows to have at the foot of the line, the appropriate information for the correct manufacture of a package of the...
Developed in the last third of the 20th century, two-piece containers of this type are undoubtedly the greatest advance in the technology of metal packaging, since its...
In the last decades of the last century, a new technique for the manufacture of sausage packaging was developed, which is known as DRD. It was one of the most important...
On different occasions we have been asked the question: What are the advantages or disadvantages of using sausage packaging in relation to the classic "3 pieces"? Or also What...
Description, function, types and measurements of the curls - or edges - of the wings of bottoms and covers. DEFINITION It is designated by curl to the outer rim of a lid or...
Some indications for the realization of the holes for lodging plastic necks in metal containers. PREAMBLE The use of plastic necks, spouts and stoppers is very widespread...
SUMMARY Dimensioning, tooling for its execution, and quality control for the necessary drilling to be made for the assembly of a metal neck. INTRODUCTION In packages...
Use, types and design of these accessories for metal containers. USE It is common that for certain uses, metal containers need an overcap. This happens when the content of...
SUMMARY It defines the function of the bottom flange in the closure operation of a container, the different shapes of the flange used, how to measure it and its appropriate...
SUMMARY In a simple way it develops in the form of a table, the calculation of the variable cost of a lid, starting from the consumptions necessary for its manufacture. ...
SUMMARY The way to prepare a "product file" is developed that allows to have, at the foot of the line, the adequate information for the correct manufacture of a lid or bottom....
SUMMARY Some ideas on how to precisely determine the cut of flat metal for the configuration of a background. This system serves for any type of background or cover, both...
SUMMARY Essential measures to take into account in an aerosol cone, for its assembly in the package. INTRODUCTION To ensure interchangeability between the different parts,...
SUMMARY Study of the characteristics, dimensions and equipment necessary for the manufacture of domes of aerosol containers. INTRODUCTION The aerosol containers are part of...
SUMMARY The paint and varnish industry consumes large quantities of metal containers. These containers have the particularity of being airtight, but with an easy access to be...
SUMMARY In the traditional container of one kilogram in diameter 99, the pressure to reduce its cost has led over time, to change the profiles of the covers and bottoms,...
In order to achieve the vacuum by mechanical process in a packaging, the lids must be properly prepared. The use of notches on the flange allows sufficient space to create a...
Attending several requests, we start with this article a series of works on the easy-opening covers, of the total opening type, used in preserves in a generalized manner. In...
The metal industry uses covers or funds with different types of profiles. In this article an explanation of the use of the most frequent ones is given as well as the selection...
SUMMARY It is important to have a good document on the basic matter in the metal sector, tinplate, TFS, aluminum ... It is useful for a multitude of tasks. The following...
INTRODUCTION Metal containers in general are often lithographed on the outside and varnished inside. The lithography of the body of the container - and sometimes also the lid...
