The ingenious design of the aluminum beverage can

The ingenious design of the aluminum beverage can

Every year nearly a half trillion units of beverage can are manufactured— that’s about 15,000 per second — so many that we overlook the can’s superb engineering. Let’s start with why the can is shaped like it is. Why a cylinder? An engineer might like to make a...
LITHOGRAPHED BODY CANS WITHOUT RESERVATIONS

LITHOGRAPHED BODY CANS WITHOUT RESERVATIONS

Request Quote Business directory Canmaker store Technical information Canmaker Consultancy Canmaker News INTRODUCTION CONTAINERS WITH LITHOGRAPHED BODY Alternatives and evolution of the lithographic reserves in the bodies of the containers The external presentation of...
TIN CAN EXTERNAL CORROSION

TIN CAN EXTERNAL CORROSION

Request Quote Business directory Canmaker store Technical information Canmaker Consultancy Canmaker News   The internal corrosion in tin can during storage, has its origin in the interaction between the can and the content. This can lead to two phenomena: the...
MAIN REACTIONS BETWEEN CAN AND THEIR CONTENTS

MAIN REACTIONS BETWEEN CAN AND THEIR CONTENTS

  A. CORROSION DUE TO ACID PRODUCTS (pH 3.0 to 5.0) The main manifestation of this type of corrosion is the dissolution, by the action of the contents of the tin, of the tin and iron metals that make up the same. This dissolution is accompanied by a release of...
PRODUCT TECHNICAL SHEET: CANS “THREE PIECES”

PRODUCT TECHNICAL SHEET: CANS “THREE PIECES”

Request Quote Business directory Canmaker store Technical information Canmaker Consultancy Canmaker News   The way to prepare a “product file” is developed that allows to have, at the foot of the line, the adequate information for the correct manufacture...
CANMAKER BEADERS

CANMAKER BEADERS

Request Quote Business directory Canmaker store Technical information Canmaker Consultancy Canmaker News   Importance of the bead in a metal cans, different types, their design and uses, as well as the technique to carry them out with their various models of...
CAN FLANGE

CAN FLANGE

Request Quote Business directory Canmaker store Technical information Canmaker Consultancy Canmaker News   Functions of the can body tab or flange. Its dimensioning and how to do it.   INTRODUCTION The flange that has the body of the can in each of its ends,...
ENTAILED PACKAGING

ENTAILED PACKAGING

One of the last improvements made to canning containers has been the reduction of the diameter of the bottom. This paper explains the reasons for its origins, the advantages and disadvantages of this improvement, the basic measures of notching and how to do it.   His...
PACKAGING TWO PIECES DRD

PACKAGING TWO PIECES DRD

  In the last decades of the last century, a new technique for the manufacture of sausage packaging was developed, which is known as DRD. It was one of the most important contributions of the sector since it began its journey two centuries ago.   The idea was not new,...

Pin It on Pinterest

Abrir chat