AIR CIRCULATION HATS
SUMMARY Information for the construction of chimney caps in metal installations. UTILIZATION The cap is a piece that ends the end of a gas pipe or chimney. It is always located outside, on the roof of the industrial installation and can have different...
USE OF UV INKS
INTRODUCTION The technique of using a type of inks that dry by the action of ultraviolet radiation is relatively modern. This variety is called “UV inks” from the denomination of these radiations. The aforementioned technique is based on the use of special...
DECORATION OF CONTAINERS
INTRODUCTION The containers are decorated by means of their lithography. The lithography of a container is actually the application of a series of protective coatings that also serve the purpose of decorating the same simultaneously providing the necessary...
COMMENTS ON MAINTENANCE IN A CONTAINER FACTORY
COMMENTS ON MAINTENANCE IN A PACKAGING FACTORY REFLECTIONS First of all, we should try to define and define the broad concept of Maintenance by asking a few simple questions: – Are we satisfied with the services provided by the current maintenance system...
PREVENTIVE MAINTENANCE OF AUTOMATIC PRESSES
INTRODUCTION The automatic presses used in the manufacture of caps or standard funds for metal containers require careful attention. The reliability of them depends to a large extent on the state of the press. There are many elements of a press that can...
Preventive Maintenance and Repair in a “two-piece” packaging factory (DWI)
By Juan Manuel Sancho Moronta The author develops his experience in the implementation of a program of preventive maintenance and repair in a factory of “two-piece” type containers, built with the DWI technique. Currently this industry is the most...
PREVENTIVE MAINTENANCE
The author tells about his experience in implementing a Preventive Maintenance and Repair Program – (Preventive Maintenance and Repair) – original of CCCo. (Continental Can Company – USA) for the first time in Spain in a metal packaging...
